ReBuilder Conductive Neuropathy Gloves
rebuilder-shopping-cart-icon

0 items

|   $0.00

< >
<
>

Conductive Garment Gloves
(one pair)

Conductive Garment Gloves are woven with a special conductive thread for even stimulation distribution and maximum comfort and efficiency.
These specially-made conductive gloves allow you to treat your hands for nerve pain. Additionally, many people like to use these in bed at night!

Note: The ReBuilder (either model) is required for usage on the Conductive Garment Gloves. The ReBuilder is sold separately.

One stretch size fits all.

Price:$175.00

Conductive Garment Gloves Kit includes:
  • Conductive garment gloves (one pair)
  • Attached snap connectors (one pair)
  • Electrolyte conductivity enhancer spray (8.5oz bottle)
  • Instructional tri-fold

Using the Conductive Gloves with the ReBuilder


(2:46 long)

Use & Description

These specially-made conductive gloves allow you to treat your hands for nerve pain. Additionally, many people like to use these in bed at night.

Using Conductive Gloves:
  1. Turn the conductive gloves inside out.
  2. Holding the electrolyte bottle about 6 inches away, spray each conductive glove.
  3. Apply the electrolyte evenly across the entire conductive glove until the fabric is moist.
  4. Turn the conductive glove right-side out.
  5. Repeat spray to the conductive glove as necessary to maintain desired moisture level for your treatments.
Positioning your Hands for use with the Conductive Gloves:

Sit with your arms on a table or rest your hands on your lap. DO NOT let the conductive gloves touch as it will prevent the ReBuilder® signal from traveling through your nerves.

General Information

Warranty

90-day warranty for ReBuilder<sup>®</sup> accessories

Our conductive garments carry a 90-day warranty against manufacturer defects.
If you have any warranty issues, then please call ReBuilder Medical Inc.

877-717-5487

Connecting the Snaps

how to attach or remove ReBuilder<sup>®</sup> leadwires to conductive garments

The snap connectors will be connected to the conductive garments. Simply connect the lead wire from the ReBuilder® into the snap connector. You can also remove the snaps in order to connect to the lead wires.

Note:  It does not matter if the snaps are facing the inside or outside of your skin.

Care and Cleaning

how to clean conductive garments used for the ReBuilder

Your conductive garments are intended to be used wet. It is suggested you gently hand wash them with mild soap as necessary. DO NOT machine wash or dry! For the snaps, unsnap the snap connectors from the lead wire and conductive garments. Then dry the snap connectors before putting them away. This will help maintain optimal function of your conductive garments.